OPERATING & MAINTENANCE MANUAL MODEL : SLL series
유 양 산 전 주 식 회 사 페이지 11/21
3.4 LIGHT INSTALLATION
Light is installed on earth with anchors and refer to below procedure.
3.4.1 SHALLOW BASE INSTALLATION
Light Installation Procedure
1) Mark bolts
’
right position of light on concrete floor.
2) Make 4 holes with concrete drill hammer.
3) Lay down light on the right position of 4 holes.
4) Drive 1/2
”
anchors into the holes of light and concrete floor.
5) Set the direction of light and fix it with bolts of coupling.
1
Light
2
Anchor Bolt(1/2”*100L)
3
Concrete
