Youshiko YC9440, Руководство пользователя

Страница: 6 / 8


If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set
mode.
Setting the daily alarms:

Push the “AL” switch to the "on" position, The LCD display the “ ” icon, At the same time issued BI-BI
sound ( Except for RC ), the alarm function is ON,

Press once “ ” button, LCD display alarm time, then Press “ mode” button for few times until hour of the
Alarm time starts to flash. Use the “ ▲ ” and “ ▼ ” buttons to set the required hour.

Press “ ” button to confirm your setting, The Minute of the Alarm time starts to flash. Use the “ ▲ ” and “ ▼ ”
buttons to set the required minute.
 Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “ ▲ ” and “ ▼ ”
buttons to set the minute of snooze you need.
 Press “ ” button to confirm your setting and to end the setting procedure.
F.Y.I.:

If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the
alarm time set mode.

The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.

Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal

When the alarm is ringing, press any button except the “ ” button to stop the alarm signal. It is not
necessary to reactivate the alarm. It will ring again same time next day.
Snooze function
 When the alarm is ringing, touch the “ ” button the alarm mode will to get to SNOOZE mode. The
alarm signal sounds again after already been set.
When you wish to switch off the alarm completely : Push the “AL” switch to the "off" position, the “ ” icon
will disappears from the display, the alarm function is OFF.
RF Transmission Procedure

The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor
temperature & humidity after batteries inserted.

The remote sensor will automatically transmit temperature and humidity signal to the Weather Station after
batteries inserted.
 If the Weather Station failed to receive transmission from outdoor sensor (“ - -.- ”display on the LCD), press