Youshiko YC9440, Руководство пользователя, Страница: 5 / 8


After receiver has created a connection to the outdoor remote sensor ( After 3 minutes ) it will enter the
Radio control time receive mode.
Reception of the Radio signal:

The clock will automatically search the MSF signal after 3 minutes of any restart or changing of new fresh
batteries. The radio mast icon starts to flash.

At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure with the MSF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio
mast icon disappears from the display), the system will automatically attempt another synchronization at the
next full one hour. This procedure is repeated automatically up to total 5 times.
 To start manual MSF signal reception, press and hold the “B5: “ ▼ / ” button” for two seconds. If no
signals received within 7 minutes, then the MSF signal search stops (the radio mast icon disappears) and
start again at the next full one hour.

During RC reception ， to stop searching radio signal, press the “B5: “ ▼ / ” button” once.
F.Y.I.:
 A flashing radio mast icon indicates that the MSF signal reception has started
 A continuously displayed radio mast icon indicates that the MSF signal was received successfully

When receiving the MSF radio wave, it will automatically turn off the USB charging function.

Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.

During the RC receive mode, only the " Light/snooze " and “B5: “ ▼ / ” button” have a function, other
buttons are not functional, If you want to carry out other functions of operation, please press “B5: “ ▼ / ”
button” to exit the RC receiving mode.
Also please note radio mast icon may not show all the time, It need to conncet with RC only once every 48h
to give to accurate time.
Manual time setting:

Press and hold the “ ” button for 2 seconds, the temperature unit starts to flash. Now use “ ▲ ” and “ ▼ ”
buttons to set the temperature unit in ℃ or °F you need.

Press“ ” button to confirm your setting, the 12/24HR start to flash. Now use “ ▲ ” and “ ▼ ” buttons to set the
12/24 hour mode you need.

Press “ ” to confirm your setting, the Hour display starts to flash. Now use “ ▲ ” and “ ▼ ” buttons to set the
correct hour.

Press “ ” to confirm your setting, the Minute display starts to flash. Now use “ ▲ ” and “ ▼ ” buttons to set
the correct minute.
 Press “ ” button to confirm your setting, the weather forecast pattern display starts to flash. Now use “ ▲ ”
and “ ▼ ” buttons to select the current weather pattern.
 Press “ ” to confirm your setting and to end the setting procedures, Then it will return to the normal mode.
F.Y.I.: