4
vehicles, high voltage lines, etc.
6. Main unit Weather Forecast Function Set Up
6.1 Operation ( This is very important )
After power on, hold “WEATHER” button for 3 seconds, weather icon flash on
the LCD. Enter the current weather by pressing “
-
” or “
+
“button. Press
“WEATHER” button to confirm the setting. ( Please note: The weather
forecast may not be accurate if the current weather entered is not correct. The
weather station will start the first forecast at 6 to 8 hours later after the current
weather status is entered).
After this , leave it and don’t do anything , This weather station will pick up
signal from sensor and Radio control automatically, It may take few minutes to
few hours or for some locations, it may or can take up 24 hours.
The current weather status should be entered again if the altitude of the main
unit is changed. (Barometric pressure is lower at higher altitude location.
Therefore, altitude change will affect the weather forecast).
6.2
Weather Conditions
There are totally 5 different weather status animations in the weather forecast.
Note:
“
“ is shown if the weather forecast is Rainy and outdoor
temperature (any channel) under
0
°
C.
Sunny
Slightly Cloudy
Cloudy
Rainy
Freezing or Snow
Freezing or Snow
