DISPLAY MAIN UNIT
Stand and batteries installation
The unit is designed for desktop or wall mount for easy viewing.
1. Remove the battery door of the main unit.
2. Insert 3 new AA size batteries according to the “
+
/
” polarity mark on the battery compartment.
3. Replace the battery door.
4 . Once the batteries are inserted, all the segments of the LCD will be shown briefly before entering the
radiocontrolled time reception mode.
5. The RC clock will automatically start scanning for the radiocontrolled time signal in 8 seconds.
Note:
1. If no display appears on the LCD after inserting the batteries, press the RESET button by using a pointed object.
2. In some cases, you may not receive the signal immediately due to the atmospheric disturbance.
Pairing of wireless 5in1 sensor with Display Main Unit
After insertion of batteries, the Display Main Unit will automatically search and connect the wireless 5in1
sensor (antenna blinking).
Once the connection is successful, antenna mark and readings for outdoor temperature, humidity, wind speed,
wind direction, and rainfall will appear on the display.
Changing batteries and manual pairing of sensor
Whenever you changed the batteries of the wireless 5in1 sensor, pairing must be done manually.
1. Change the batteries to new ones.
2. Press the [SCAN] button.
3. Press the [RESET] button on the sensor.
Note:
1. Pressing [RESET] button at bottom of wireless 5in1 sensor will generate a new code for pairing purpose.
2. Always dispose old batteries in an environmental safe manner.
Radiocontrolled / atomic clock function
When the unit receives RC signal, a synctime symbol “ ” will appear on the LCD, and synchronizes daily.
Note:
1. The strength of radiocontrolled time signal from the transmitter tower may be affected by geographical location or building
around.
2. Always place the unit away from interfering sources such as TV set, computer, etc.
7
