A. Mounting on pole (Pole Diameter 1”~1.3” (25~33mm)
B. Mounting on the railing
Step 4
Place the nut in the hexagon hole of the stand,
then insert the screw in other side and then
tighten it by the screw driver.
Install the wireless 5IN1 sensor in an
open location with no obstructions above
and around the sensor for accurate rain
and wind measurement. Install the sensor
with the smaller end facing the North
to properly orient the wind direction
vane.
Secure the mounting stand and bracket
(included) to a post or pole, and allow
minimum 1.5m off the ground
Mounting guidelines:
1 . Install the wireless 5in1 sensor at least 1.5m off the ground for better and more accurate wind measurements.
2. Choose an open area within 150 meters from the LCD display Main Unit.
3 . Install the wireless 5in1 sensor as level as possible to achieve accurate rain and wind measurements.
A bubble level device is provided to ensure a level installation.
4. Mount the wireless 5in1 sensor with the wind meter end pointing to the North to correctly orient direction of
the wind vane.
6
