BoSS StairMAX
User Guide
5
StairMax 600
Assembly Procedure
3
Link these two frames with two horizontal and two
diagonal braces as shown in the illustration, to
form the tower base - start by clipping the horizontal
braces to the frame uprights.
4
Fit the platform to the top rungs of the two end
frames. Make sure all four platform end hooks are
in contact with the top rungs, then secure in place by
engaging the hook latches (see illustration). Fit a
standard frame to the top end of the frame that is at
the lower step, secureing it in place with the interlock
clips. Fit the gate frame to the top of the frame that is
resting on the uper step. Make sure that the access
bar is positioned so that it opens in towers the tower.
