Assembly
From this stage on you will require the guardrail pack
for platform heights up to 1.7m
1.7m platform height with added guardrails
Stage 2: Base Pack, 2m Extension
Pack & Guardrail Pack
(for heights up to 3.7m)
CHECK NOW if ground is uneven fit adjustable legs.
5
Fitting Adjustable Legs
Turn Base Unit upside
down so wheels are facing
upwards as shown. Use a
19mm AF spanner to loosen
bolt and remove fixed castor.
Connect legs to castors.
Insert adjustable legs into
tubes, once complete
reverse base frame with
wheels being on floor. Adjust
legs to produce a level
structure. We recommend
that two persons are
required, to ease the
erection process.
Assembly
6
Follow the Base Unit procedure, place Horizontal
Brace on bottom rung. Ensure structure is level before
tower system. Use adjustable legs to level. Now fit Spring
Interlock clips (supplied in Guardrail Pack). Assemble the
4 spring locking clips as shown, expand spring over end
and slide down into hole of tube.
7
Insert 2 m (8 rung) Lift Frame in Base Frame, ensure
the interlock clips are engaged.
9
Fitting Interlock Clip
Locked
Position
10
Assembly
8
Clip on diagonal braces
as shown. Ensure that
separate frames are always
braced together. Place second
brace on opposite side as
shown. Ensure claws are locked
into position. To unlock press
trigger and lift.
9
Attach one stabiliser to each corner of the tower.
Loosen clamp and place around vertical tube, tighten
using handle. Refer to Stabiliser Section for positioning
diagrams. To attach one stabiliser to each corner of
the tower loosen clamp and place around vertical tube,
tighten using handle.
11
