Young Living Rainstone, Руководство по эксплуатации

Страница: 7 / 16

7
Cleaning and Maintenance
Always turn off and unplug the diffuser prior to cleaning. To ensure proper
performance, clean the water reservoir, water level sensor, and ultrasonic
plate after each use. Never use a corrosive detergent to clean the ultrasonic
plate or damage will occur. Periodically check under the diffuser to keep
the fan intake free of debris. Debris can be removed by blowing on the fan
intake opening or wiping with a clean, dry cloth. (Do not use aerosol sprays,
solvents, or abrasives to clean the diffuser.) When not in use, clean the
diffuser and store dry. Replacement ultrasonic plates can be purchased from
Young Living.
Cleaning the Interior of the Diffuser
1. Take the lid off of the diffuser.
2. Pull the ventilation hole switch upward to close it.
3. To empty the water reservoir, pour out the water from the side opposite
the ventilation hole.
Note: Avoid getting any water into the ventilation hole or it will
damage the internal electronics and shorten the product life.
4. To clean essential oil buildup on the ultrasonic plate, gently wipe it off
using the included brush dipped in rubbing alcohol.
5. To clean the water reservoir and water level sensor, pour a neutral
cleanser into the water reservoir and use the included cleaning brush to
remove any residual oil.
3 5