Bike Installation Instructions
STEP 1: If you are planning to load only one bike, we recommended to placing it on the crossbeam
closest to the vehicle. Press the buckle on each wheel cradle to release the straps, as shown below. Note:
The bicycle’s front tire should be on the driver’s side of the vehicle.
STEP 2: Adjust the wheel cradles based on the distance of the bicycle’s wheel base, ensuring the cradles
are wide enough apart to support the bicycle tires. To move the cradles, open the cam gear (Step 2B)
and slide them along the crossbeam. Close the cam gear (Step 2A) to lock the cradle in place.
Press this buckle to release the straps.
When the bike’s tire is against the
wheel cradle, press down the button
on the wheel cradle to secure it firmly.