Step 4: If desired, place a second bike on the crossbeam farthest from the vehicle. Follow the process
outlined in Steps 1-3, but ensure the bicycle’s front tire is on the passenger’s side of the vehicle and do
not move the U-Shaped Tube. Instead, adjust the second block to ensure it will rest comfortably against
the second bicycle. Then, press the buckle to release the strap from the block. Wrap the strap around
the frame of the bicycle, then re-insert it into the block. Pull the strap as tight as possible to ensure a
proper fit against the bicycle frame.
Folding Status 1
N
OTE:
In rare cases, the way the U-Shaped Tube was positioned in Step 3 may make it impossible for the
second block to fit properly against the second bicycle. If this happens, release the strap around the first
bicycle, tilt the U-Shaped Tube and adjust both blocks so that both blocks can rest comfortably against a
bicycle frame. Then, re-wrap the strap around the frame of the first bicycle and re-insert the strap into
the innermost block. Pull the strap as tight as possible to ensure a proper fit against the bicycle frame.
Finally, press the buckle to release the strap from the outermost block. Wrap the strap around the frame
of the second bicycle, then re-insert the strap into the outermost block. Pull the strap as tight as possible
to ensure a proper fit against the bicycle frame.
⚠
WARNING:
If you still cannot position the U-Shaped Tube and blocks in a way that will properly secure
both bicycles, do not attempt to transport more than one bike on the carrier.
Press the buckle to release the strap
from the block. Wrap the strap
around the frame of the bicycle, then
re-insert it into the block. Pull the
strap as tight as possible to ensure a
proper fit against the bicycle frame.
The second block on the U-Shaped Tube can be
adjusted based on the design of the bicycle’s frame.