Youin MTB EVEREST, Руководство пользователя

Страница: 25 / 136

25 ENGLISH
8. LCD Display
· TRIP Clear Function
In TRIP mode and TRIP value is NOT 0, press the UP and DOWN button at the same
time for more than 1 second to clear the TRIP data information.
· Exit Setting
In personalized parameter setting interface, short press Switch button to confirm the
input. Press and hold ON/OFF button to save the settings and exit the current setting.
8.5 Warnings
Use the display with caution. DO NOT attempt to release or link the connector when
battery is power on.
· Try to avoid hitting the display.
· DO NOT modify system parameters to avoid parameter disorder.
· Make the display repaired when error code appears.
Software version of this display may be different. Please always refer to an actual
version.
8.6 Error code definition
Error
code
Definition
90 Torque Zero Error
11 Torque Out Range
92 Torque Sensor Fault
13 Gear Sensor Error
15 Speed Sensor Error
18 Cadence Error
20 PCB Over-Temp Warning
A1 PCB Over-Temp Error
22 PCB Sensor Fault
25 Motor Over-Temp Warning
A6 Motor Over-Temp Error
A7 Flash Error
80 Communication Lost
32 LORA Communication Lost
01 CRC Communication Error
40 Motor EST Error
41 Motor Over-Peak Current
C2 Motor Loss Phase
43 Motor Over DC Current
D0 Battery Over Voltage
51 Battery Low Voltage
52 Battery Over Current
E0 Battery Version Error
E5 Display Version Error