Yotobike Leopard, Руководство пользователя

Страница: 19 / 38

17
o Test both front and rear brakes to ensure they function properly.
Verify brake pads are not excessively worn and are correctly aligned with the rims.
Check brake control cables for proper lubrication, adjustment, and wear.
Ensure brake levers are well-lubricated and firmly attached to the handlebars.
o
o
o
Inflate tires to within recommended limits displayed on sidewalls. o
Check for bulges or signs of excessive wear. o
Clean tires to ensure tread is exposed. o
Ensure rims run true and have no obvious wobbles or kinks. o
Check that all wheel spokes are tight and not broken. o
Check the wheel balance in Pedal Only Mode. If you notice the riding is imbalanced or the rotation of the front wheel makes noise,
it means the bolts were not completely tightened or not aligned horizontally.
o
o Ensure the chain is lubricated, clean, and operates smoothly.
o Exercise additional caution to maintain the chain in wet or dusty conditions.
o Tighten pedals firmly onto the cranks.
o Check that the cranks are tightened properly and are not warped.
o Adjust derailleurs for optimal performance.
o Secure shift and brake levers to the handlebar.
o Lubricate all brake and shift cables adequately.
o Make sure the hub motor spins freely and the bearings function well.
o Inspect all power cables connected to the hub motor to ensure they are secure and intact.
o Confirm that hub motor axle bolts are tight and all torque arms and washers are correctly placed.
o Charge the battery prior to use.
o Look over the battery pack for any signs of damage.
o Affix the battery firmly to the bike frame.
Brakes
Wheels & Tires
Chain
Cranks & Pedals
Derailleurs
Motor Drive
Battery Pack
Safety Checklist