Yosin EVM-8XA Series, Руководство по программированию

Страница: 43 / 84

42

If you hear a beep on entering SYS_7_6, it means that the Automatic System Configuration
mode has not completed setting up the Busy Tone Cycle Lengths or the Ringback Tone Cycle
Lengths.

SYS_7_7 , the Tone Cycle Record menu, always remains the time lengths of the last two cycles
of the last tone detection; it can help you to set up the lengths of tone cycles of a service tone
directly, or parse the reason that the EVM failed to recognize the specified tone.
Integration to PBX
ID DTMF Digit Strings
An ID DTMF Digit string carrying the call information of a call must include:
- A Type code, which represents the call type.
- A meaningful phone number: the internal phone number of a mailbox owner activating a
Recording-request or activating a Mailbox Program Access Request, or the internal phone
number of the original destination of a call. However, a valid phone number must be an
extension number included in an EXTN Group.
To enable the EVM to detect the specified Type codes from the Digit strings, you need to specify
the Type field.
To enable the EVM to find a phone number from the Digit string received on answering a call of a
specific type, you need to specify the Type code and the EXTN field by a setting that determines
how the EVM handle the type of calls.

ADM_5_9908 _[axxx] determines the maximum time length of ID DTMF Detection.

ADM_5_9920 is used to specify the Mailbox Program Access Request code

ADM_5_9922 is used to specify the Phone Recording Request code

ADM_5_9924 is used to specify the Type field.

ADM_5_9926 is used to specify the 1
st
All-call code.

ADM_5_9927 is used to specify the 2
nd
All-call code.

SYS_6_3 is used to specify the 1
st
No-answer code.

ADM_5_9928 is used to specify the 2
nd
No-answer code.

SYS_6_4 is used to specify the 1
st
Busy-line code.

ADM_5_9929 is used to specify the 2
nd
Busy-line code.
If you haven’t information about a type of Digit string content, you may take the following actions
to enable the EVM to report the receiving Digit string to a call.
1. Enter ADM_1_[7] and hang up. If you hear a voice reporting a string of digits, please ignore it.
2. Make a phone call to an internal phone for the call type you want. The PBX will forward your
call to the EVM, according to the Call-Forwarding feature specified for this internal phone
number. On answering the call, the EVM reports a string of digits, which is the information of
this call. If the EVM receives nothing within the ID DTMF Detection time, you hear the main
greeting.
3. Repeat Step 2 for another call type. If finished, reset the previous option in ADM_1_[X].