4
Works Finish
Care & Maintenance
Before starting vehicle, clean pipe thoroughly using
a soft cloth and rubbing alcohol to remove any oil
and finger prints.
The color of the exhaust will change once the
system has gone through a heat cycle of 15 minutes
or more. Color will vary depending on lean/rich
conditions.
Clean using a soft cloth and soap. Do not use
abrasive materials as it will scratch the surface.
Surface reconditioning services are available to
remove scratches and undesirable discoloration due
to extreme heat. Contact Yoshimura Tech
Department at (800) 634-9166 / in CA (909) 628-
4722 for more information.
