YO H2O
User guide
v1.2
page 24/26
Figure 20
Node creation form.
5.
New nodes must be added in OTAA mode
. Nodes can be switched to ABP mode after
activation in the Yosensi Management Platform by changing the Node configuration.
Click on the link in the ‘Node Name’ column. Go to the ‘KEYS’ tab and switch ‘LoRa Type’ from
OTAA to ABP and fill in the blank spaces, then press update. The identifiers ‘Device Address’
(
devaddr
), ‘Application Session Key’ (
appskey
) and ‘Network Session Key’ (
nwkskey
) are
provided by Support, or can be found in the device’s configuration pane while connected to
the node in the firmware section.
