YO H2O
User guide
v1.2
page 19/26
DEVICE PARAMETERS
NAME
DESCRIPTION
POSSIBLE
VALUES
DEFAULT
VALUE
READ/
WRITE
measinterval
Measuring and sending interval
LoRa [s]
1–999999
28800
R/W
bleuptime
Bluetooth LE uptime [s]
1–999999
86400
R/W
blepwr
Bluetooth LE transmit power [dBm]
0-99
0
R/W
bleinterval
Bluetooth LE advertising interval
[ms]
10-9999
9000
R/W
Parameters description
-
nwktype:
used for setting the device in public or private network type.
-
acttype:
used for setting the device in ABP or OTAA mode.
-
deveui, … , appskey:
predefined addresses and keys, these parameters are generated using
multiple IDs specific to the particular MCU and are unique for each device.; they can be
changed if needed.
-
interval:
determines the interval of sending broadcast packets, used to connect to every BLE
receiver around the device.
-
subband:
used for setting the communication frequency sub-band in LoRaWAN.
-
measinterval:
measurement interval [s] between sending LoRa packets.
-
bleuptime:
time in seconds after bluetooth advertising parameters configuration will change
to those set in the “device” section. Unless users shake the device or the device detects
leakage, then parameters “blepwr” and “bleadvinterval” are equal to the parameters given in
the “ble” section
.
It helps devices to work longer on one battery.
-
blepwr
: parameter indicates the Bluetooth LE transmit power [dBm]. In YO H2O bluetooth
power changes after the time period set in the “bleuptime” parameter to the given value in
the device section.
-
bleadvinterval
:
parameter indicates the Bluetooth LE advertising interval [ms]. In YO H2O
bluetooth advertising interval changes after the time period set in “bleuptime” parameter to
the given value in the device section.
