V - Light Kit Installation
(2).
Attach the glass shade by
screwing it onto the light kit
pan clockwise.
(1).
1.Install the bulbs (not included)
to the lamp holders (sockets) properly.
TURN ON THE POWER. INSTALLATION IS SUCCESSFUL
AND THE FAN IS READY FOR OPERATION.
Bulb
Lamp Holder
Groove
Glass Shade
Bottom plate
(1).
Attach the bottom plate by
screwing it clockwise onto
the light kit pan.
Plate
IV - Blades installation
1.Remove the plate at the light kit housing that covers the fan-shaped hole.
2.Insert the fan blades into the fan-shaped hole.
3.Secure the blade into the motor assembly by using the washer and the motor screws which are provided.
4.Repeat the steps 2-3 until 4 blades are assembled.
5.Re-attach the plate in place after blade installation is completed.
Blade Screw
Fan-shaped Hole
Washer
Blade
Blade
Motor
Assembly
Plate
P5
Light Kit
Pan
Light Kit Pan
[ With Light ]
[ No Light ]