York YLAA0285SE Скачать руководство пользователя страница 153

Страница: 153 / 206

153

JOHNSON CONTROLS

FORM 150.72-NM3 (1020)

ISSUE DATE 10/05/2020

SECTION 7 – UNIT CONTROLS

The ENTRY keys allows the user to view, change

programmed values. The ENTRY keys consist of an ↑

(UP) arrow key, ↓ (DOWN) arrow key, and an ENTER/

ADV key.

Up and Down Arrow Keys

Used in conjunction with the OPER DATA, HISTORY,

COOLING SETPOINTS, SCHEDULE/ADVANCE

DAY, OPTIONS and CLOCK keys, the ↑ (UP) and

↓(DOWN) arrow keys allow the user to scroll through

the various data screens.

Refer to the section on

“DISPLAY/PRINT

” keys for specific information on the

displayed information and specific use of the ↑ (UP) and

↓ (DOWN) arrow keys.

The ↑ (UP) arrow key, and ↓ (DOWN) arrow key are also

used for programming the control panel such as changing

numerical or text values when programming cooling

setpoints, setting the daily schedule, changing safety

setpoints, chiller options, and setting the clock.

“ENTRY” KEYS

Enter/ADV Key

The ENTER/ADV key must be pushed after any change

is made to the cooling setpoints, daily schedule, safety

setpoints, chiller options, and the clock. Pressing this key

“enters” the new values into memory. If the ENTER/

ADV key is not pressed after a value is changed, the

changes will not be “entered” and the original values

will be used to control the chiller.

Programming and a description on the use of the ↑ (UP)

arrow key, and ↓ (DOWN) arrow, and ENTER/ADV

keys are covered in detail under the SETPOINTS and

UNIT keys.

00068VIP

Содержание YLAA0285SE















































































































































































































Результаты поиска

Содержание YLAA0285SE

Отзывы:

Похожие инструкции для YLAA0285SE

Бренды по названию

Популярные бренды

York YLAA0285SE, Руководство пользователя

Результаты поиска

Содержание YLAA0285SE

Отзывы:

Похожие инструкции для YLAA0285SE

Бренды по названию

Популярные бренды