SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
JOHNSON CONTROLS
149
FORM 160.54-O1
ISSUE DATE: 9/10/2014
2
OVERVIEW
This screen allows definition of the sales order param-
eters. The commissioning date is entered by the Ser-
vice Technician at the time of chiller commissioning.
These values should never be changed or entered by
anyone other than a qualified Service Technician. En-
try instructions are included in the
OptiView Control
Center – Service Instructions (Form 160.54-M1)
. The
remainder of the values are entered at the YORK Fac-
tory during the manufacturing of the chiller.
DISPLAY ONLY
Model Number
Factory defined model number of the chiller system.
Panel Serial Number
Factory defined serial number for the micropanel.
Chiller Serial Number
Factory defined serial number for the chiller system.
YORK Order Number
Factory defined order number under which the chiller
was sold.
System Information
Factory defined conditions for which the chiller was
originally rated and sold.
Condenser and Evaporator Design Load
Information
Factory defined description of the condenser and evap-
orator configuration at time of shipment.
Nameplate Information
Factory defined information about the chiller motor
configuration.
For fields requiring access level of SER
-
VICE. Service Technicians refer to the
OptiView Control Center - Service Instruc
-
tions (Form 160.54-M1) for operation
instructions and explanation of all pro-
grammable setpoints and displayed values.
PROGRAMMABLE
Commissioning Date
Access Level Required: SERVICE
Define the date at which the chiller was commissioned.
SALES ORDER SCREEN
00320VIP
FIGURE 50 -
SALES ORDER SCREEN
