Press “UP” and “DOWN” for more fault information. A maximum of 16 faults can be recorded.
The setting will terminate if there’s no operation for 5 seconds or “CANCEL” is pressed.
Running Status
Press “FUNCTION” and “CONFIRM” keys for 5 seconds to enter Running Status viewing screen. The
digital and analog inputs and outputs are displayed in sequence in hour display area (Area 1) by
pressing “UP” and “DOWN” keys.
The modules can be switched over by pressing “TIMER” key.
Fault Reset
Press “CONFIRM” and “CANCEL” keys for 5 seconds to reset the faults manually.
Keylock
Press “TIMER” and “DOWN” icons for 5 seconds to enter Keylock function. The “LOCK” icon will
appear and all touchkeys and the physical button will be disabled while the function is activated.
Press “TIMER” and “DOWN” again to terminate the function.
Pump Circulation
Pre
ss “COOLING” key for 5 seconds in daily display to enter Pump Circulation function. The “PUMP”
icon will appear.
The pump will operate with no compressor running while this function is activated.
Low Sound Mode
Press “CONFIRM” key for 5 seconds in temperature setting display to enable Low Sound Mode. Press
“FUNCTION” and “CONFIRM” keys for 5 seconds in temperature setting display to enable Night Low
Sound Mode. In Night Low Sound Mode the low sound function will only be activated during 21:00 to
6:00.
Manual Defrost
Press “COOLING” and “FUNCTION” keys for 5 seconds in temperature setting display to enter
Manual Defrost setting. The modules can be selected by pressing “TIMER” and defrost will begin
once pressing “CONFIRM”.
Press “CANCEL” to terminate this setting.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz