52
Fill out the selected function No. in the space provided in the following table:
Item
SEG2
SEG1
SET
Item
SEG2
SEG1
SET
1 Circulator Function at Heating
Thermo-Off
25 N/A
2 Switch to Night Mode
(Low Noise)
26
Crankcase Heating Band
Control During Stoppage
3 Cancellation of Outdoor
Ambient Temperature Limit
27
Indoor Fan Warm Start Period
Setting
4 Defrost in Cold Area
(Change Of Defrost Condition)
28
Intermittent Operation of
Outdoor Fan Motor
5 Gentle Fan Speed
Defrost Setting
29
Indoor Expansion Valve Target
Value Control for Cooling (Only
For 4-Way Cassette Type)
6 Cancellation of Outdoor Unit
warm Start
30
Indoor Expansion Valve
Minimum Opening Limit During
Heating Switch-Off
7 Capacity Priority Mode
31 N/A
8
Minimum Evaporating
Temperature Setting for
Cooling
32
Forced Defrosting After Forced
Stoppage Of Defrosting Cycle
9 Compressor Frequency Target
Value Control for Heating
33
Indoor Expansion Valve Control
Change for Stoppage Indoor
Unit in Heating Mode
10 Indoor Expansion Valve Target
Value Control for Cooling
34
Compressor Maximum
Frequency Suppression
11 Indoor Expansion Valve Target
Value Control for Heating
35 Convert Unit in Checking Mode
12
Indoor Expansion Valve
Opening Control During
Heating Operation Stoppage
36
Indoor Fan ON/OFF Setting
during Forced Stoppage
13
Indoor Expansion Valve
Opening Control During
Heating Thermo-Off
37 N/A
14
Indoor Expansion Valve Initial
Opening Control During
Heating Thermo-On
38
High difference setting
15 Indoor Expansion Valve Initial
Opening Control for Cooling
39 N/A
16
Outdoor Expansion Valve
Initial Opening Control for
Heating
40 Oil return control
17 Low Noise Setting*
41 Performance correction
18 Demand Function Setting
42 Outdoor temperature range
19 Wave Function Setting
43
Cooling mode Start control 2 Hz
change speed
20
Protection of Decrease
in Outlet Temperature for
Cooling
44
Cooling mode Start control 2 Hz
change speed
21 Outlet Temperature Control
45
Compressor Maximum
Frequency Change during
Defrosting Mode
22 Adjustment of Fan Running
(For Multiple Installation)
46 Oil return mode of indoor unit
23 N/A
47 N/A
24
Thermo-Off Setting for Outdoor
Unit After Defrosting Operation
*when ambient temperature is higher than 44
℃,
silence and low noise setting mode is invalid.