York DWCPXY, Руководство пользователя

Страница: 10 / 24

Wired Zone Controller DWCPXY
4
2+6
▲+▼
(Lock)
3 Operation Instructions
3.1 On/Off
Press On/Off to turn ON the unit and turn it OFF by pressing the button again.
Note:
Fig.3.1.1 indicates the “Off” state of the unit after
applying power
.
Fig.3.1.2 indicates the
“On” state of the unit after
applying power
.
Fig.3.1.1 “Off” State Fig.3.1.2 “On” State
3.2 Mode Setting
Under
the “On” state of the unit, press the Mode button to switch the operation modes as in the
following sequence: Auto
–Cooling–Dry–Fan–Heating.
3.3 Temperature Setting
Press ▲or ▼ to increase/decrease the preset temperature. If pressing either of them
continuously, the temperature will be increased or decreased by 1°
F
every 0.5 second, as shown
in Fig.3.3.1. below
In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 60.8°F to 86°F
(16°Cto 30°C).
In the Auto mode, the setting temperature is not adjustable.
Upon start-up of a unit that had no malfunction or when the unit is
OFF, press them at the same time for five seconds to enter a lock
state. In this instance, no other buttons will respond if pressed. Press
them again for five seconds to discontinue this condition.