4
GB
Care and maintenance
Disconnect the unit after use
Attention
* Disconnect the equipment before clean-
ing.
* Do not pour water directly on the equip-
ment.
How to clean the air filter
. Open the front panel.
Use a screwdriver to remove the
screws.
Slide the two locks simultaneously, as
shown below.
Pull the panel smoothly.
2. Remove air filters.
Slide the locks at the edges of the front
panel and remove the air filter.
Then remove the three activated carbon
filters.
3. Clean the filter.
Use a vacuum cleaner or clean the air
filter with water whenever dirty. Use
neutral detergent with water only. Let the
filter air dry in a shaded location.
Notes:
- Do not wash with hot water.
- No not dry with an open flame.
- Do not turn air conditioning unit on without
the filters.
4. Fasten the air filters.
- Fasten the air cleaners with the filter,
and fasten the filter to the front grid by
hanging it on the protected part.
- Insert the air filter by sliding the locks at
the back.
5. Close the front panel.
How to clean the front panel
. Open the front panel, as indicated in Step
of «How to clean the air filter».
2. Remove the air filters, as indicated in
Step 2 of «How to clean the air filter».
3. Remove the front panel.
Open the front panel 45° and pull it out
as shown below.
4. Wash it with water.
Whenever the front panel is very dirty,
use a soft cloth with neutral detergent.
Shake off and let air dry in a shaded
location.
Note:
Do not wash with hot water.
5. Replace front panel as indicated in Step
3.
6. Fasten the air filter as indicated in Step
4 of «How to clean the air filter».
7. Close the front panel as indicated in Step
.
How to clean the fins and casing:
- Clean with a soft cloth or water and a
neutral detergent.
- Do not use gasoline, polish nor similar
products.
Assembly and disassembly of the fins
. Disassembly of the fins.
Remove the screws on the sides of the
fins. Clean with a soft cloth.
2. Assembly of the fins.
Insert the side locks of the fins in their
original position, and tighten screws.
Before turning the unit on for the first
time in the season
. Make sure nothing is obstructing air
intakes and discharges of either unit.
2. Make sure grounding connection is cor-
rect.
3. Make sure the air filter is clean.
4. Turn the air conditioning unit on 6 hours
after installing it.
Cleaning at the end of the season
. Clean the filter and casing.
2. Disconnect the unit.
3. Clean the outdoor unit.
4. If the outdoor unit is rusted, it can be
painted.
Changing the cleaner filter
. Open the front panel, as indicated in Step
of «How to clean the air filter».
2. Remove the activated carbon cleaner
filters.
Remove the air filter and unscrew and
remove the cleaner filters.
3. Remove the bag with the filters and insert
a new filter.
Fasten with the screws.
4. Fasten the air filter, as indicated in Step
4 of «How to clean the air filter».
Functions and durability of the cleaner
filter
* Absorbs carbon dioxide, carbon monox-
ide, benzene, gasoline or similar odours.
* Absorbs impurities of over .0 um in the
air, such as dust, pollen, germs, viruses
and similar.
* Durability is between 6 months and a year.
������
������
������
Содержание DBK/DBO-35 BG
Страница 2: ......
Страница 53: ......
Страница 54: ......
Страница 56: ...www johnsoncontrols com ...