York International X730, Упражнения и инструкция по эксплуатации

Страница: 7 / 40

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY. *
*
YORK X730 / 06
5.
A
B
C
D
E
ATTACH THE HANDLE BAR POSTS
Insert the handle bar pivot rod through the pivot rod
bushes fitted on the handle bar bracket carefully as shown.
NOTE: TAKE CARE to ensure that the middle wire does not
get trapped when you insert the pivot rod.
NOTE: TAKE CARE
Attach the right handle bar onto the handle bar pivot rod
carefully. Connect the hand pulse sensor wire socket,
which protrudes from the pivot rod bush on handle bar, to
the middle wire plug protruding from the end of the handle
bar bracket securely.
NOTE: TAKE CARE to ensure wires do not get trapped
when fitting handlebar
NOTE: TAKE CARE
X1
#5575-19
#5575-11 #5575-42
Slide the right low handle bar post into the right handle
bar post and secure in position with the adjusting knob.
#5575-43
X1
Slide the rest of the wires into the bush on the handle bar
bracket carefully.
NOTE: TAKE CARE to ensure wires do not get trapped
when fitting handlebar
NOTE: TAKE CARE
Secure the right handle bar post to the handle bar bracket
by using one allen head bolt, spring washer and washer.
F
HANDLE
BAR
BRACKET
PIVOT
ROD
MIDDLE WIRES
HAND
PULSE
SENSOR
WIRE
SOCKET
MIDDLE
WIRE
PLUG
PIVOT
ROD
RIGHT
HANDLE BAR
HANDLE
BAR
BRACKET
BUSH
RIGHT
LOW
HANDLE
BAR
POST
HANDLE
BAR
BRACKET
RIGHT
HANDLE
BAR