7
steP 1
1. lift the uprights.
2. Attach at the base using 4 x bolts (c), 2 x washers (D) and
2 x washers (e) - use the allen key to tighten them well.
steP 2
1. rotate the computer until it’s in the position shown.
2. Attach to the top of the uprights using 2 x bolts (c) and
2 x washers (e) - use the allen key to tighten them well.
3. remove the safety pin connected from the side frame
and upright post as shown.
IMPORTANT: The safety pin helps prevent serious injury
during assembly and must not be removed prior to this
step. The safety pin must be removed at the end of this
step for the folding and incline features to function
properly.
Part 1 - Fixings
Part No. D x 2
Washer (Ø8 x Ø18)
Part No. C x 4
Screw (M8 x 20L)
Part No. E x 2
Washer (Ø10 x Ø25)
Part 2 - Fixings
Part No. C x 4
Screw (M8 x 20L)
Part No. E x 2
Washer (Ø10 x Ø25)
assemBlY insTRUcTiOns
Содержание MONZA Rival
