76
74
75
Clip snap hook onto one end of shorter chain, then
onto loop at end of second cable
Bolt last link in other end of chain
to the rear of thebase centre tube
* Adjusting this chain once the gym is assembled
will increase the cable tension.
If tension is too great, you may have difficulty
inserting weight stack pin.
Fine tuning the cable tension.
Once the chain has been adjusted, you can fine-
tune the cable tension by adjusting the threaded
end of the cable.
Always remember to use at least 25% of thread &
to tighten lock nut.
3/8” SNAP LOCK HOOK x1
M10 x 35 HH BOLT x1
M10 NYLOC x1
M10 WASHER x2
Washer
each
side
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
York Fitness K850 /26
