7
INCREASE SPEED OF THE MOTOR:
REDUCTION SPEED OF THE MOTOR:
1. If the motor will make two sounds after the procedure, it means that it has the highest or lowest speed.
2. Before programming the limit positions, the lowest drive speed is set by default. After programming the limit
positions, the highest drive speed is set by default.
3. The motor has 3 speeds: 65 rpm, 100 rpm, 130 rpm.
17. Restore factory settings
16. Motor speed regulation
Press and hold
the programming button
on the motor for 10 seconds.
The LED diode flash 7 times.
Motor will make 4 sounds.
Press
programming button P2
on the remote control.
LED diode flash once.
Motor will make a sound.
Press
UP button.
Press
UP button.
LED diode will flash 5 times.
Motor will make a sound.
The speed
has been increased.
LED diode flash once. Motor
will make a sound.
Press programming button
P2 on the remote control.
LED diode flash once.
Motor will make a sound.
Press
DOWN button.
Press
DOWN button.
LED diode will flash 5 times.
Motor will make a sound.
The speed
has been reduced.
The factory settings
have been restored.
LED diode flash once. Motor
will make a sound.
5
5
7
