6
1. After setting the limit positions, it is possible to set the third position (favorite) between those positions.
2. To program a new third limit position, the previously programmed position must be deleted.
3. After performing the following procedure, holding down the STOP button for 3 seconds causes the curtain to be
positioned in the third limit position.
1. This function is enabled at the factory.
2. The MOTION TOUCH function automatically starts the motor when the curtain is pulled.
3. Follow the procedure below to on / off the function.
13. Programming the third limit position
14. Removing the third limit position
15. On/Off MOTION TOUCH function
12. Removing the limit positions
Press
DOWN button.
Press
programming
button P2.
Press
programming
button P2.
LED diode flash once.
Motor will make a sound.
LED diode flash once.
Motor will make a sound.
LED diode will flash 5 times.
Motor will make a sound.
The limit positions
have been removed.
The third limit position
has been deleted.
MOTION TOUCH function
has been off/on.
Press and hold the programming
button on the motor for 6 seconds. Release
programming button after the second flash
of the diode. Motor will make 2 sounds.
LED diode will flash 5 times.
Motor will make a sound.
Press
STOP button.
Press
STOP button.
Press
STOP button.
Press
programming button P2
on the remote control.
LED diode flash once.
Motor will make a sound.
LED diode flash once.
Motor will make a sound.
LED diode will flash 5 times.
Motor will make a sound.
The third limit position
has been set.
Press
STOP button.
Press
STOP button.
Set the curtain in the
third limit position.
Press
programming button P2
on the remote control.
LED diode flash once.
Motor will make a sound.
LED diode flash once.
Motor will make a sound.
LED diode will flash 5 times.
Motor will make a sound.
5
5
5
5
