11. Removing third limit position
12. Programming another transmitter
13. Deleting another transmitter
14. Deleting motor memory
5
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Favourite position
has been removed.
Press
programming
button P2.
Press
STOP button
once.
Press
STOP button
once.
Receiver can be controlled by up to 20 transmitters.
Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from programming
mode without saving any changes.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Press
programming
button P2
on the A remote control.
Press
programming
button P2
on the A remote control.
Press
programming
button P2
on the B remote control.
Remote control
has been programmed.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Press
programming
button P2
on the A remote control.
Press
programming
button P2
on the A remote control.
Press
programming
button P2
on the B remote control.
Remote control
has been removed.
Deleting memory of motors radio receiver will cause for all programmed transmitters to be lost.
Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from programming
mode without saving any changes.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
Blind
will make up/down
movement.
All active transmitters have
been removed from memory.
Press
programming
button P2
on any remote control.
Press
STOP button.
Press
programming
button P2
on remote control.
