Motor should be mounted in places protected from unfavourable weather conditions. Do not pull the motor head when
removing it from the tube.
1. Cut the tube
to the proper length.
2. Deburr the edges
and remove the metal residue.
3. Place the adaptation
on the motor.
4. Measure the distance (L)
between the inner edge of motors head
and the end of the motors adaptor.
5. Insert the motor into the tube
up to the point of connection
between the edge of the tube and
the inner edge of the motors head.
Attach the tube to the
coupling part of the adaptation
2. Safety measures
3. Placing motor in the tube
Before installing or using motor please read the following instruction. The installer must comply with the standards and regulations in
force in the country where the appliance will be installed and provide information to users about the conditions and maintenance of the
device. Failure to follow these instructions can present risk to life and health, or invalid functioning of the roller shutter. This also
results in the loss of warranty rights.
Motors torque parameter should be adequate to the
weight of the roller shutter curtain.
Do not hit the motor. Reduce the vibration of the
motor to a minimum.
Electrical system control should be performed
regularly to detect any signs of use or damage
of the motor.
All contact of the motor with any liquids should be
reduced to minimum.
No tools should be used when placing motor
in the tube.
During the adapter montage special attention must
be paid not to damage the motor.
Motor and its control system should be kept out
or reach of children.
4. Charging
1. It is recommended to charge the battery by min. 3 hours.
2. Ensure that the drive is fully charged before initial startup.
3. Charge the battery at least once every 6 months.
4. Use only power supply, dedicated to the device. Using another power supply may damage the motor.
2
