MEAT GRINDER (ACCORDING TO MODEL D)
(See figure D
)
_______________________
Assembling and fitting the attachment
Take the body (Cutter housing 22) by the feed tube with the largest opening upwards.
1.
Insert the worm shaft 16 (drive pins first ) in the cutter housing 22.
2.
Fit the cutter blade 17 on the shaft with the cutting edges upwards.
3.
Place the selected hole-plate over the blades ensuring that the two lugs fit in the two cut-outs in the
4.
body (see the figure D).
Screw ring (19) the cap nut fully home on the body.
5.
Check the assembly .the shaft should have no play nor be able to turn on itself.
6.
Play the multifunction head in the horizontal position (a click should be heard).
7.
Offer up the assembled mincer attachment, titled towards you, to the outlet and engage it fully.
8.
Return the feed tube to a vertical position by turning to the rear until it stops.
Place the removable tray on the feed tube.
9.
WARNING
When you dissembled the body (Cutter housing 22), you must press
the button (Release button for Cutter housing, see the arrow of figure
D).
Insert the pieces of meat in the feed tube piece by piece using the
pusher, never push the meat with the finger or any other utensil.
ENGLISH
