11
Pairing instructions:
1.
To configure your Water Leak Sensor* as a
controller, press and hold the SET button for
5-10 seconds, until the LED quickly blinks green,
then release the button.
2.
To configure your Smart Motorized Valve as
the responder, ensure the valve is closed (manu-
ally, or by pressing the SET button), then press
and hold the SET button for 5-10 seconds until
the LED quickly blinks green, then release the
button. Upon pairing, the LED will stop blinking.
3.
Test your paired devices. Upon the detection
of water at the leak sensor, the valve should
automatically close. Please note: the valve will
not open when water is removed from the leak
sensor. The valve should be closed from the app
or by pressing the SET button on the valve.
4.
Repeat for other devices, as needed.
Unpairing instructions:
1.
At the leak sensor, press and hold the SET
button for 10-15 seconds, until the LED quickly
blinks green then red, then release the button.
2.
At the Smart Motorized Valve, press and hold
the SET button for 10-15 seconds, until the LED
quickly blinks green then red, then release the
button.
3.
Upon unpairing, the LED on the leak sensor
and the motorized valve will stop blinking and
turn off.
