<2. Notes on Handling>
2-1
IM 01W03D02-01EN
2. Notes on Handling
The FN310 is fully factory-tested before shipment.
When the FN310 delivered, check the appearance
for damage, and also check that the mounting
parts shown in Figure 2.1 are included with your
shipment. If “No Mounting Bracket” is indicated, no
mounting bracket is included.
Bracket fastening bolt
FN310
mounting bracket
U-bolt nut
FN310
fastening bolt
Spring washer
Bracket
fastening nut
U-bolt
F0201.ai
Figure 2.1
FN310 Mounting Hardware
Table 2.1 FN310 Mounting Hardware
Part name
Quantity
FN310 mounting bracket
1
FN310 fastening bolt
4
Bracket fastening bolt
2
Bracket fastening nut
2
Spring washer
2
U-bolt
1
U-bolt nut
2
■ Bundled items
• User’s Manual (IM 01W03D02-01EN)
• FN310 mounting hardware
When specified mounting bracket.
• Protection cap (optional specifications)
• Wired tag plate (optional specifications)
• EU DECLARATION OF CONFORMITY
(F9090HZ), if optional specification /KS27 is
specified.
2.1 Check the Model Name and
Configuration
The model name and configuration are indicated
on the nameplate. Verify that the configuration
indicated in the “Model and Suffix Code” in
subsection 10.2 is in compliance with the
specifications written on the order sheet. Manual
number omitting the language code at the end is
printed on the nameplate.
F0202.ai
Figure 2.2
Nameplate
MODEL : Specified model code.
SUFFIX : Specified suffix code.
STYLE : Style code.
S/N : Serial number.
DATE : Date of manufacture.
SUPPLY : Supply voltage.
TOKYO 180-8750 JAPAN : The manufacturer name
and the address*
1
.
*1
“180-8750” is a zip code which represents the following
address. 2-9-32 Nakacho, Musashino-shi, Tokyo Japan
2.2 Transport
To prevent damage while in transit, leave the FN310
in the original shipping container until it reaches the
installation site. For transportation of batteries, refer
to subsection 8.5 “Handling Batteries”.
