manualshive.com logo in svg

YOKOGAWA WT310, Руководство пользователя

Поделиться
Скачать
YOKOGAWA WT310 Скачать руководство пользователя страница 3

i

IM WT310-02EN

Thank you for purchasing the WT310, WT310HC, or WT330 Digital Power Meter (hereinafter, “WT310/
WT310HC/WT330” will refer to all of these products). The WT310/WT310HC/WT330 is a power 
measurement instrument that can measure parameters such as voltage, current, and power.
This getting started guide primarily explains the handling precautions and basic operations of the 
WT310/WT310HC/WT330. To ensure correct use, please read this manual thoroughly before 
beginning operation.
Keep this manual in a safe place for quick reference in the event that a question arises.
This manual is one of three WT310/WT310HC/WT330 manuals. Please read all manuals.

Manual Title

Manual No.

Description

WT310/WT310HC/WT330 Digital 

Power Meter User’s Manual

IM WT310-01EN The manual explains all the WT310/WT310HC/WT330 

features, except for the communication interface 

features, and how to use them.

WT310/WT310HC/WT330 Digital 

Power Meter Getting Started Guide

IM WT310-02EN This guide. Provided as a printed manual. The manual 

explains the handling precautions and basic operations 

of the WT310/WT310HC/WT330 and provides an 

overview of its features.

WT310/WT310HC/WT330 Digital 

Power Meter Communication  

Interface User’s Manual

IM WT310-17EN This manual explains the WT310/WT310HC/WT330 

communication interface features and how to use them.

PDF files of all the manuals above are included in the accompanying CD.

Notes

•  The contents of this manual are subject to change without prior notice as a result of continuing 

improvements to the instrument’s performance and functionality. The figures given in this manual 
may differ from those that actually appear on your screen.

•  Every effort has been made in the preparation of this manual to ensure the accuracy of its 

contents. However, should you have any questions or find any errors, please contact your nearest 
YOKOGAWA dealer.

•  Copying or reproducing all or any part of the contents of this manual without the permission of 

YOKOGAWA is strictly prohibited.

•  The TCP/IP software of this product and the documents concerning it have been developed/created 

by YOKOGAWA based on the BSD Networking Software, Release 1 that has been licensed from 
the Regents of the University of California.

Trademarks

•  Microsoft, Internet Explorer, MS-DOS, Windows, Windows NT, Windows XP, Windows Vista, and 

Windows 7 are either registered trademarks or trademarks of Microsoft Corporation in the United 
States and/or other countries.

•  Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated.
•  In this manual, the TM and ® symbols do not accompany their respective registered trademark or 

trademark names.

•  Other company and product names are registered trademarks or trademarks of their respective 

holders.

Revisions

•  January 2013   1st Edition

1st Edition: January 2013 (YMI)
All Rights Reserved, Copyright © 2013 Yokogawa Meters & Instruments Corporation

 

Содержание WT310



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды