App-3
IM WT18O1E-02EN
Code
Message
Chapter or Section
692
Cannot execute for the media itself.
—
693
Cannot store at Network Drive.
16.3
694
Trigger Event is Off.
7.2
695
File version is new. Update firmware.
—
696
The file may be damaged or an unsuccessful file close could have occured.
—
697
Abnormal data file. Unsuccessful finish of file save is detected.
—
705
Can not operate while accessing medium.
Wait until access has completed.
—
706
Can not operate during hard copy.
Wait until output has completed.
—
711
File operation not allowed during hard copy.
Wait until the hard copy completes.
—
713
Cannot execute for All or Custom display mode.
—
720
Over Run had occured.
—
721
Can not set or execute because store is processing. Try Again.
—
722
No target Element for integration execution.
8.1
723
Can not set or execute when Integ Independent Control is on.
8.1
724
Can not set or execute because recording is processing. Try again.
—
725
File creation stopped. File size exceeded 2G bytes.
—
750, 751
Unable to connect to the server.
Check the network settings and configuration.
Chapter 20
752
This ftp function in not supported.
—
753
FTP Error: Client Handle
Confirm the network settings and connection.
Chapter 20
758
Failed to acquire time from SNTP server.
Confirm the network settings and connection.
20.5
759
Failed to initialize network.
Confirm the network settings.
Chapter 20
800
Illegal date-time.
Set the correct date and time.
3.5*
801
Illegal file name.
The file name contains characters which are not allowed or the file name is not a valid
MS-DOS file name. Enter another file name.
17.2
802
Cannot be set or executed in the Normal measurement mode.
Usable measurement mode are as follows.
—
811
Cannot be set to this display mode.
Harmonics option is necessary.
—
812
Cannot be set or executed while storing data.
—
813
Cannot be set while integration is running.
Reset Integration.
8.3
814
Cannot be set or executed when NULL is on.
Please turn NULL off.
21.9
815
Cannot be set or executed when the Data Update Interval is Auto.
1.15
823
Cannot change during CAL.
Wait until CAL is completed.
21.8
827
Illegal math expression.
Input a correct computing equation.
8.1
831
Processing now.
Retry setting or execution again.
—
841
Attempted to start integration after integration time has reached its preset value.
8.3
842
Attempted to start integration while integration is in progress.
8.3
843
Measurement stopped due to overflow during integration or due to a power failure.
8.3
844
Attempted to stop integration even though integration was not in progress.
8.3
845
Attempted to reset integration even though integration was in progress or integration
mode was not selected.
8.3
846
Attempted to start integration while measurement of peak overflow was in progress.
—
847
Attempted to start integration in continuous integration mode when integration preset
time was set to “0”.
8.2
848
Attempted made to start integration in real time counting integration mode when the
end time had already passed.
8.2
849
Attempted made to start storing in real time counting storing mode when the end time
had already passed.
16.1
* Getting started guide, IM WT1801E-03EN
Appendix 1 Messages and Corrective Actions