4-2
IM 04P02B01-01E
4.2
Key Operations
This section describes basic operations on the panel keys to change various settings.
Functions are set in Setting mode or Basic Setting mode.
Entering Setting Mode
Hold down the
MENU
key for 3 seconds.
The Setting mode display appears. The top and bottom lines are the setup item and
comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section
that you change appears shaded.
The item to be controlled blinks.
Setup item
Comment
Set=Range
Input range and record
The panel keys are set to the functions marked above the keys.
FEED
DISP
MENU
RCD
MENU
FUNC
CH UP
SHIFT
ESC/?
CHARACTER
1
Exiting from Setting Mode (Returning to Operation Mode)
Hold down the
MENU
key for 3 seconds.
The screen returns to operation mode.
Entering Basic Setting Mode
Basic Setting mode is entered from Setting mode.
Hold down the
MENU
key for 3 seconds to enter Setting mode. Next, hold down both the
(
DISP
) key and the
(
FUNC
) key for 3 seconds.
The Basic Setting mode display appears. The top and bottom lines are the setup item
and comment, respectively.
The section that is blinking in the setup item that you change. In this manual, the section
that you change appears shaded.
The item to be controlled blinks.
Setup item
Comment
Basic=Alarm
Auxiliary alarm functi
Exiting from Basic Setting Mode (Returning to Operation Mode)
This operation is used to return to Operation mode after changing the settings in Basic
Setting mode.
Press the
ESC
key several times to return to the
Basic=
screen.
Press the
key or
SHIFT
+
key to select
End
and then press the
key. The
setup save screen appears.
Basic=End
Save Settings
Press the
key to select
Store
and then press the
key. The setting is applied,
and the screen returns to Operation mode. If you select
Abort
and press the
key,
the setting is discarded, and the screen returns to Operation mode.
End=Store
Save settings and rest
