YOKOGAWA TDLS200, Дополнение к инструкции по эксплуатации

Страница: 17 / 39

17
IM11Y01B01-12E-A
2nd Edition
Note: The TDLS200 flange must be at least 10” from the furnace wall. Heat will damage the optics
at distances less than 10” from the furnace wall!!!
The above preferred method may not be possible in every site specific situation. The actual
dimensions may have to be adjusted to suit the practical installation considerations in each case
but it should remain as close as possible to the above ‘preferred’ method.
≥
10”
≥
10”