6
IM 701988-01E
General Specifications
Standard operating
conditions
Temperature
23±5°C
Humidity
4
55 ±10% RH
Operating
environment
Temperature
5 to 40°C
Humidity
4
20 to 80% RH
Altitude
2000 m or less
Storage environment Temperature
−20 to 60°C
Humidity
4
20 to 80% RH
Altitude
3000 m or less
Interface and power supply
Dedicated logic probe interface
Power supplied from a dedicated logic probe
interface
Calibration cycle
1 year
Warm-up time
30 minutes or more
Ext. dimensions (main body)
94.5 mm × 40 mm × 15 mm
Total length
Approximately 1.8 m
Weight
Approximately 180 g (excluding accessories)
4. No condensation
Standards Compliance
EMC
standards
Emissions Conforming standards
EN61326-1 ClassA
EN55011 Class A Group1
EMC standards of Australia and New Zealand EN55011
Class A, Group1
Korea Electromagnetic Conformity Standard (
한국
전자파적합성기준
)
This is a Class A product. Operation of this product in a
residential area may cause electromagnetic interference
in which case the user will be required to correct the
interference.
Immunity
Conforming standard
EN61326-1 Table 2 (for use in industrial locations)
Influence in the immunity testing environment
The logic probe’s polarity must not reverse
5
Environmental
standards
6
EU RoHS Directive compliant
5. Test conditions
Connected to the DLM2000 series mixed signal oscilloscope, with the logic probe’s
lead set terminated at 50 Ω.
Cable condition
Attach a ferrite core (TDK: ZCAT2035-0930A, YOKOGAWA part number:
A1190MN) to both ends of the cable (see figure below).
6 For conformity to environmental regulations and/or standards other than EU,
contact your nearest YOKOGAWA office (PIM113-01Z2)
