7
IM 701924-01E
Attaching the Retaining Cover
7.
Pass the flanged sections of the two input pins through the center
retaining-cover holes, and place the input pins on the holders on either
side.
Flange
8.
Align the + and − markings on the retaining cover to those on the probe
head, and attach the retaining cover to the probe head.
Check that the retaining cover’s left and right latches are securely locked.
Removing the Retaining Cover
9.
While pinching the retaining cover at the top and bottom, remove the
cover from the probe head.
Note
• The retaining cover can only be used with a flanged input pin that is included in
the package.
• You cannot use the probe’s ground terminal if you use the retaining cover.
Operating Procedures
