7
IM 701923-01E
Product Specifications
Electrical Specifications
(The electrical specifications are based on standard operating environment after
30-minute warm-up.)
Frequency bandwidth
DC to 2 GHz (–3 dB or higher)
Attenuation ratio and DC
voltage accuracy
1
10:1, within ±2% of the differential input voltage (into
50-Ω load, excluding oscilloscope errors)
Input capacitance
Approx. 1.1 pF (relative to ground, typical value
4
)
Input resistance
Within 50 k
Ω
± 2% (relative to ground)
Output impedance
Approx. 50
Ω
(typical value
4
)
Maximum operating input
voltage range
±7 V
Maximum differential input
voltage range
±5 V
Maximum non-destructive
voltage
2
±25 V (DC+ACpeak)
Rise time
175 ps or less (excluding characteristics of the
oscilloscope, typical value
4
)
Residual noise
500
μ
Vrms or less (at the probe output, typical value
4
)
Residual offset
3
Within ±10 mV (after adjustment)
Common mode rejection
ratio
DC to 10 MHz:
–35 dB or less
10 MHz to 100 MHz: –20 dB or less
100 MHz to 1 GHz: –12 dB or less
1 Excludes residual offset voltage.
2 Nondestructive maximum input voltage. This is not the probe’s dynamic range.
3 When 0 V is applied to both positive and negative input terminals.
4 Typical values represent typical or average values. They are not strictly warranted.
1
10
100
1000
1
10
100
25
Frequency (MHz)
Derating of the input voltage by frequency
(V peak)
500
2000
5
Nondestructive
input voltage range
Input voltage range
Use it within this range.
Vin+
Positive signal input terminal
Vin-
Negative signal input terminal
7 V
–7 V
7 V
–7 V
