3
IM 701923-01E
Output termina
The output terminal is a BNC connector. It connects to an oscilloscope input
BNC connector.
Variable resistor for adjusting offset voltage
You can adjust the offset voltage using an appropriate driver as described
below.
Adjustment driver
Use an adjustment driver that fits into the adjustment groove. Using a driver
with a large grip or a driver with a small head can damage the adjustment
turn stop or groove.
Recommended adjustment driver bit dimensions
Head thickness (W): 0.2 to 0.35 mm; head width (L): 1.3 to 1.5 mm;
head shape: flat or Philips
L
W
Usage Precautions
CAUTION
• When touching the circuit under test with the probe pins, take care not to
apply excessive force to the probe head. Damage can result if a force of
5 N or more is applied.
Applied force
Probe Head
Probe Pins
As much as possible, keep the pins at a right angle
relative to the circuit under test.
• Use a soft cloth to wipe away dirt, and be careful not to damage the
probe. Do not immerse the probe in liquid or use abrasive cleaners on
the probe. Do not use any volatile solvents such as benzine.
• Do not bring the probe near transformers, circuits with large currents, wireless
devices, or other objects emitting large electric or magnetic fields. Doing so
may produce inaccurate measurement results.
• As much as possible, keep the probe pins vertical relative to the circuit under
test.
• It is recommended to use the probe stand (model 701919). It can prevent
excessive force from being applied to the probe head.
Component Names
