YOKOGAWA HANDY CAL CA51, Руководство пользователя

Страница: 76 / 108

IM CA71-E
7-7
Functions Provided by DIP Switch
7
7.5 Switch Not Used
Although switch 5 (No Use switch) of the DIP has no effect on calibrator
operation, the switch should be placed in the OFF (left-side) position.
7.6 Setting the Temp Switch
By placing switch 6 (Temp switch) in the ON (right-side) position, you
can select
°
F for temperature readings. Placing the switch in the OFF
position results in the selection of
°
C.
7.7 Selecting the Contact In Function (Contact
Input for Pulse Measurement)
By placing switch 7 (Contact In switch) in the ON (right-side) position,
you can measure transistor contact on-off signals. If you select the
contact input function, the
(contact) symbol appears on the LCD.
By placing the switch in the OFF position, you can measure normal
pulse.
7.8 Disabling the Automatic Power-off Feature
By placing switch 8 (Auto P Off switch) in the ON (right-side) position,
you can disable the automatic power-off feature and continue using the
calibrator. (See the paragraph "Automatic Power-off" in Chapter 3,
"Before Starting Source/Measurement," for further details.)
NOTE
If you have disabled the automatic power-off feature, be sure to turn off the
POWER switch when you finish using the instrument in order to prevent un-
usual battery power consumption.
7.5 Switch Not Used