YOKOGAWA GX70SM Скачать руководство пользователя страница 64

Страница: 64 / 181

2-36

IM 04L57B01-01EN

Click

Execute

The combined data file (WLC file) will be saved.

Operation complete

How Files Are Stored after Data Combining

After the data is combined, the combined data files are saved in the specified folder.

When the files are saved, certain character strings are automatically added to the specified

combined data file name.

The file names and conditions vary depending on the number of original GX/GP/GM data

files there are for combining.

• When there is a single original GX/GP/GM data file for combining

A single file is saved.

Name of the saved file: aaa (bbb).WLC
aaa: Specified file name

bbb: Original GX/GP/GM data file name

• When there are multiple original GX/GP/GM data files for combining

The same number of files as the original GX/GP/GM data files is saved.

The combination numbers are assigned by taking into account the recording serial

numbers of the original GX/GP/GM data files.
Name of the saved file: aaa_bbb (ccc).WLC
aaa: Specified file name

bbb: Combination number 0001 and up

ccc: Original GX/GP/GM data file name

1 This excludes the case when the file is not saved because data combining is not successful

(described later).

2 If the name is longer than 20 characters, an abbreviation (...) is assigned.

The following is an example showing how combined data files are saved when “Combined”

is specified for the file name.

When there is a single original data file

Item

File name

Original GX/GP/GM file

GX20_Rec.GEV

Name of the saved file

Combined

Combined data file that is saved

Combined (GX20_Rec).WLC

When there are multiple divided files containing continuous data (the order of file

names and recordings is aligned)

Item

File name

Original GX/GP/GM file

GX20_Rec_001.GEV 1st recording file

GX20_Rec_002.GEV 2nd recording file

GX20_Rec_003.GEV 3rd recording file

GX20_Rec_004.GEV 4th recording file

Name of the saved file

Combined

Combined data file that is saved

Combined_0001 (GX20_Rec_001).WLC

Combined_0002 (GX20_Rec_002).WLC

Combined_0003 (GX20_Rec_003).WLC

Combined_0004 (GX20_Rec_004).WLC

2.7 Saving Logging Data to a File and Combining Logging Data

Содержание GX70SM






















































































































































































Результаты поиска

Содержание GX70SM

Отзывы:

YOKOGAWA GX70SM, Руководство пользователя, Страница: 64 / 181

Результаты поиска

Содержание GX70SM

Отзывы: