<5. Wiring>
5-2
IM 01W03D01-01EN
To install FN110 with mounting bracket, follow
the procedure below.
1) Assemble the mounting bracket and fix it on a
50A (2-inch) pipe.
2) Connect the remote antenna cable to the
FN110.
3) Protect the connection as necessary. For
details of the protection, refer to subsection
4.2.1 “Installation of FN110”.
4) Fix the FN110 to the mounting bracket.
FN110 holder
FN110 mounting bracket
FN110
holder bolt
FN110
Remote
antenna
cable
2-inch pipe
mounting bracket
2-inch pipe
U-bolt
Bracket
fastening nut
Bracket
fastening bolt
Spring
washer
U-bolt nut
F0502.ai
Figure 5.2
Horizontal Pipe Mounting of FN110
2-inch pipe
Bracket
fastening nut Spring washer
U-bolt nut FN110
mounting bracket
FN110
holder bolt
FN110
Remote antenna cable
FN110 holder
Bracket
fastening bolt
2-inch pipe
mounting bracket
U-bolt
F0503.ai
Figure 5.3
Vertical Pipe Mounting of FN110
5.3 Installation and Connection
of FN110
IMPORTANT
The FN110 terminal is covered with a cap at
the time of deliverty. Keep the cap attached
until connecting the FN110 or remote antenna
cable to protect the inside connection part. The
unscrewed cap should be stored in order to
replace it immediately after the FN110 or remote
antenna cable is removed. If there is a possibility
that get wet with water, order FN310 with
optional specification for a protection cap.
5.3.1 Installation of FN110
Location of FN110
Mount the FN110 at the proper location according
to the wireless environment described in subsection
2.4 “Selecting the Installation Location”. The
mounting to the pipe such as 50A (2-inch) pipe
needs to secure the enough strength to endure a
strong wind, vibration and so on. The FN110 must
be mounted vertically.
Fixing of FN110
Fix the FN110 on a 50A (2-inch) pipe with the
mounting bracket provided as the remote antenna
cable option.
