<7. Operation>
7-7
IM 01C25C01-01E
F0710.ai
screw
push
push
push
push
push
push
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
Save/Cancel the value
7. Output Mode
3. Press Unit
2. Tag Number
*
*
*
*
*
*
*
4. Press LRV
5. Press URV
8. Display Out1
9. LRV-Apply Press
10. URV-Apply Press
6. Damping Time
Select Output mode
Select Press unit
Edit Tag number
Edit Press LRV
Edit Press URV
Edit Display out1
Set LRV
Set URV
Edit Damping time
Process
Measurement
Display
Zero adjustment
9, 10 : Re-range by applying actual pressure
Process
Measurement
Display
11. Device Information
Run/Cancel
1. Loop Test
***
Select Output current
Activate LPS mode
**
*: These parameter configurations are available with the software revision (SOFT REV)2.03 or later.
Software revision can be checked via a field communicator (HART/BRAIN) or DTM. Please refer to IM 01C25T01 for HART
parameter “Software rev” and IM 01C25T03 for BRAIN “SOFT REV.”
**: This paratmeter configuration is available with the softeware revision (SOFT REV) 3.01 or later.
***: This paratmeter configuration is available with the softeware revision (SOFT REV) 5.01 or later.
