<2. Handling Cautions>
2-10
IM 01C27C01-01EN
2.12.2 FCC compliance
This equipment contains transmitter module FCC ID:
SGJ-WFC001
*1
SGJ-WFC014
*2
*1: Only applicable for selecting output signal code -L.
*2: Only applicable for selecting output signal code -1.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation of this device.
Co-located:
This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
FCC WARNING:
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
RF Exposure Compliance:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines. This equipment should
be installed and operated keeping the radiator at
least 20 cm or more away from person’s body.
2.12.3 Industry Canada (IC) compliance
This equipment contains transmitter module IC:
8999A-WIC001
*1
/ 8999A-WIC013
*2
.
This device complies with ISED’s applicable
license-exempt RSSs. Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired, operation of the device.
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment should be installed
and operated keeping the radiator at least 20 cm or
more away from person’s body.
This radio transmitter IC Number 8999A-WIC001
*1
/ 8999A-WIC013
*2
has been approved by Industry
Canada to operate with the antenna types
listed below with the maximum permissible gain
indicated. Antenna types not included in this list,
having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use
with this device.
Antenna type:
Gain:
COLLINEAR
9 dBi
*1
/ 6 dBi
*2
Sleeve
2.14 dBi
French:
Le présent appareil est conforme aux CNR d’ISDE
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le
fonctionnement.
Cet équipement est conforme aux limites
d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles
d’exposition aux fréquences radioélectriques (RF)
CNR-102 de l’IC. Cet équipement doit être installé
et utilisé en gardant une distance de 20 cm ou plus
entre le radiateur et le corps humain.
Le présent émetteur radio IC Number
8999A-WIC001
*1
/ 8999A-WIC013
*2
a été
approuvé par Industrie Canada pour fonctionner
avec les types d’antenne énumérés ci-dessous
et ayant un gain admissible maximal. Les types
d’antenne non inclus dans cette liste, et dont le
gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l’exploitation de l’émetteur.
Antenne type:
Gain:
COLLINEAR
9 dBi
*1
/ 6 dBi
*2
Sleeve
2.14 dBi
*1: Only applicable for selecting output signal code -L.
*2: Only applicable for selecting output signal code -1.
2.13 EU RoHS Directive
Applicable standard: EN IEC 63000
