5-180
IM DLM4038-17EN
:SERialbus<x>:CXPI:SEARch:SETup:WAKe
upsleep:WPULse
Function Sets or queries the CXPI bus signal search
wakeup pulse setting.
Syntax
:SERialbus<x>:CXPI:SEARch:SETup:
WAKeupsleep:WPULse {<Boolean>}
:SERialbus<x>:CXPI:SEARch:SETup:
WAKeupsleep:WPULse?
<x> = 1 to 4
Example
:SERIALBUS1:CXPI:SEARCH:SETUP:
WAKEUPSLEEP:WPULSE ON
:SERIALBUS1:CXPI:SEARCH:SETUP:
WAKEUPSLEEP:WPULSE?
-> :SERIALBUS1:CXPI:SEARCH:SETUP:
WAKEUPSLEEP:WPULSE 1"
:SERialbus<x>:DECode?
Function
Queries all settings related to the decoding of
serial bus signals.
Syntax
:SERialbus<x>:DECode?
<x> = 1 to 4
:SERialbus<x>:DECode[:FORMat]
Function
Sets or queries the decode display format of
serial bus signals.
Syntax
:SERialbus<x>:DECode[:FORMat] {BINar
y|DECimal|HEXa|ASCii|SYMBol}
:SERialbus<x>:DECode[:FORMat]?
<x> = 1 to 4
Example
:SERIALBUS1:DECODE:FORMAT BINARY:SER
IALBUS1:DECODE:FORMAT?
-> :SERIALBUS1:DECODE:FORMAT BINARY
:SERialbus<x>:DECode:SSCMode
Function
Sets or queries the decode display of the start/
stop condition of I
2
C serial bus signals.
Syntax
:SERialbus<x>:DECode:SSCMode {<Boole
an>}
:SERialbus<x>:DECode:SSCMode?
<x> = 1 to 4
Example
:SERIALBUS1:DECODE:SSCMODE ON
:SERIALBUS1:DECODE:SSCMODE?
-> :SERIALBUS1:DECODE:SSCMODE 1
:SERialbus<x>:DISPlay
Function
Sets or queries whether or not serial bus signal
analysis will be performed.
Syntax
:SERialbus<x>:DISPlay {<Boolean>}
:SERialbus<x>:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:DISPLAY ON
:SERIALBUS1:DISPLAY?
-> :SERIALBUS1:DISPLAY 1
:SERialbus<x>:FLEXray?
Function
Queries all FlexRay bus signal settings.
Syntax
:SERialbus<x>:FLEXray?
<x> = 1 to 4
:SERialbus<x>:FLEXray:ANALyze?
Function
Queries all FlexRay bus signal settings.
Syntax
:SERialbus<x>:FLEXray:ANALyze?
<x> = 1 to 4
:SERialbus<x>:FLEXray[:ANALyze]:SET
up?
Function
Queries all FlexRay bus signal analysis settings.
Syntax
:SERialbus<x>:FLEXray[:ANALyze]:SET
up?
<x> = 1 to 4
:SERialbus<x>:FLEXray[:ANALyze]:SETu
p:BCHannel
Function
Sets or queries the channel bus type for FlexRay
bus signal analysis.
Syntax
:SERialbus<x>:FLEXray[:ANALyze]:SETu
p:BCHannel {A|B}
:SERialbus<x>:FLEXray[:ANALyze]:SETu
p:BCHannel?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:ANALYZE:SETUP:BC
HANNEL A
:SERIALBUS1:FLEXRAY:ANALYZE:SETUP:BC
HANNEL?
-> :SERIALBUS1:FLEXRAY:ANALYZE:
SETUP:BCHANNEL A
5.25 SERialbus Group
