36
Precision Making
Appendix A
– DL850E(V) knobs and keys
ScopeCorder introduction workbook
Copyright © Yokogawa Electric Corporation
ANALYSIS key
Displays a menu for performing power math. This key is valid on models with the /G5 option.
(SHIFT+) MATH key
Displays a menu for waveform computation. Press SHIFT and then MATH to display a menu for
configuring FFT computation.
HISTORY key
Displays a menu for using the history feature to recall data.
(SHIFT+) MEASURE key
Display a menu for automated measurement of waveform parameters. Press SHIFT and then
MEASURE to display a menu for GO/NO-GO determination.
CURSOR key
Displays a menu used when performing cursor measurements.
(SHIFT+) ZOOM key
Displays a waveform zoom display menu. Press SHIFT and then ZOOM to display a menu for
data searching (the search & zoom function).
MAG knob
Use this knob to set the zoom factors for the Zoom1 and Zoom2 zoom boxes. This knob has a
push switch. Press the MAG knob to switch the zoom box whose zoom factor is set by it.
POSITION knob (Zoom POSITION knob)
Use this knob to set the zoom position. This knob has a push switch. Press the POSITION knob
to switch the zoom box whose zoom position is set by it.
Other