4/6
IM AQ7277-61EN
Top Screen
Top menu
Configuring Network Settings and Selecting the Display Language
You can configure settings such as the Ethernet address, and select the screen’s display language.
1. On the remote controller’s
Tool
menu, click
System Setup
.
The SetupSystem dialog box appears.
Select the screen’s display language.
Set the user name for user authentication.
Set the password for user authentication.
Set the timeout value.
Select this check box when you want touse DHCP.
When you do not want to use DHCP, set the following:
• IP address
• Netmask
• Gateway
Select this check box when you want to use the
user authentication feature.
2. After you finish configuring the settings, click
OK
.
A dialog box asking you to confirm that you want to restart the AQ7277 appears.
3. Click
Yes
.
The settings are applied to the AQ7277, and the AQ7277 restarts.
4. When the Remote Controller dialog box appears, click
Connect
.
The information in the remote controller window is updated.
